Muffler, 3" m pos. 8 online, pos. 8
Code: SL200008Product detailed description
Accessories for Blower (BLOWERS)
Vacuum accessories (EXHAUSTERS)
Additional parameters
Category: | Tlumič hluku |
---|---|
Warranty: | 6 měsíců-vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 2 kg |
Materiál: | Pozinkovaný kov |
? Připojení : | 3" m vnější závit |

Filter for Blower 2", 100 µm, pos. 9

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Plastic elbow 4" female thread, PVC 150 mm - pos.6

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

PVC plastic nipple, pos. 6

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Plastic elbow 1"1/4 female thread, PVC 150 mm - pos.6

Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.