Muffler, 1/2" m pos. 7
Code: SL100008Product detailed description
Accessories for Blower (BLOWERS)
Vacuum accessories (EXHAUSTERS)
Additional parameters
Category: | Tlumič hluku |
---|---|
Warranty: | 6 měsíců-vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 2 kg |
Materiál: | Pozinkovaný kov |
? Připojení : | 1/2" m vnější závit |

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Filter for Blower 2", 100 µm, pos. 9

Filter for Blower 3", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Filter for Blower 2", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

Filter for Blower 1"1/2, 100 µm, pos. 9