Brass check valve 1"1/4 pozice 12
Code: BLCV032BRProduct detailed description
Accessories for Blower (BLOWERS)
Vacuum accessories (EXHAUSTERS)
Additional parameters
Category: | Příslušenství vývěvy Dmychadla |
---|---|
Warranty: | 6 měsíců-vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 1 kg |
Materiál: | Mosaz |
Připojení : | 1"1/4 |
Pozice: | 12 |

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Filter for Blower 1"1/4, 100 µm, pos. 9

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

Filter for Blower 3", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6

Plastic elbow 4" female thread, PVC 150 mm - pos.6

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

Filter for Blower 2", 100 µm, pos. 9

Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

Filter for Blower 4", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.