Spare circulating round for blower-vacuum
Code: BLIM101 BLIM201 BLIM301 BLIM401 BLIM501 BLIM601 BLIM701 BLIM901 Choose variantProduct detailed description
Additional parameters
Category: | Náhradní díly |
---|---|
Warranty: | 0 |
Materiál: | Hliník |
Plastic elbow 2" female thread, PVC 150 mm - pos.6
Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
Filter for Blower 1"1/4, pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...
Filter for Blower 2", 100 µm, pos. 9
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
Filter for Blower 1"1/4, 100 µm, pos. 9
Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
PVC plastic nipple, pos. 6
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
PVC plastic nipple, pos. 6