Monitor speed AR003

Code: AR003

215 € / pcs 260 € incl. VAT 215 € / 1 pcs

Delivery to: 10/01/2025

Position sensors can be combined with the AR003 evaluation system to detect pulses, velocities or stops of non-metallic objects. Intuitive adjustment of pulse count, output function, hysteresis and start delay via potentiometer

There is one solid state output and one relay output. They open or close (functions can be set) if the number of pulses is above or below (can also be set) the preset value

Switching and operating states are indicated by four LEDs. The integrated broadband power supply for direct or AC power ensures high flexibility. The 24 V DC output powers the connected sensors

Detailed information

Show all related products

Description
Discussion

Product detailed description

Technical data AR003

General information

Scope of use Universal evaluation of pulse sequences for overshoot and undershoot; rotational speed monitoring

Start suppression Yes

Switch point setting 2 presets, fine adjustment by potentiometer

Setting range 0 .1 ... 10 Hz / 10 ... 1000 Hz

Outputs / inputs

PNP pulse input (type 2 according to IEC 61131-2)

Input frequency≤5000 (corresponds to a minimum pulse/pause length of 0.1 ms)

Relay output Yes

Transistor output Yes

Contact current capacity 4 A (240 V AC, 24 V DC); resistive load

Dielectric strength Reinforced (according to EN 61010)

Galvanically isolated Yes

Surge Category II

Contamination level 2 (≤ 240 V AC)

Switching voltage 10 ... 30 DC SELV

Short-circuit trans.Yes

Current carrying capacity trans.100

Switching output relay (1 switching contact); transistor output (pnp-switched; supplied externally)

Electrical data

Operating voltage 110 ... 240 AC / 27 (24) DC

Voltage tolerance AC± 20% / DC ± 10%

Power input AC 6 W / DC 4 W

Mechanical data

Terminal block housing

Sheath material Plastic: PC GF20

Ambient conditions

Ambient temperature min.-25°C

Ambient temperature max.60°C

Max. permissible relative hum idity 80% (31°C), decreasing linearly to 50% (40°C), non-condensing

Degree of protection IP20 IP21

Additional information

MTTF

Function display4x LED
yellow
green

Accessories supplied Connector plug: 4 pin with screw connection; (pack of 5)

CE approval
cULus

Dimensional drawing legend1: screw terminals
2: label
3: potentiometer
4: DIN rail mounting

Connection and pin assignment

Wiring and pin configuration legend 01: DC Supply voltage (+)
02: DC Supply Voltage (+)
03: DC Supply Voltage (-)
04: DC Supply Voltage (-)
05: DC Sensor power supply (+)
06: Sensor signal 1 pNP
07: DC power supply to the sensor (-)
08: 2 pNP sensor signal
13: power supply transistor output (+)
14: pNP transistor
15: common external supply (-)
16: nc
17: relay (normally open)
18: relay ( common)
19: Relay (normally closed)
20: nc
21: AC Supply Voltage (L)
22: AC Supply Voltage (L)
23: AC Supply Voltage (N)
24: AC Supply Voltage (N)
nc = not connected

Additional parameters

Category:	Monitorování impulzů
Warranty:	2 years
Weight:	0.2 kg

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Login to your account