Diaphragm pump ARO 3/8" Polypropylen/Santoprene, Output 40 l/min, pressure 8.3 bar Výkon 40 l/min, výtlak 8,3 bar
Code: PD03P-BRS-PAARelated products
Plastic barrel pump ARO PD05, max. output 54,5 l/min, suitable for neutral and abrasive media.
Santoprene diaphragm for pump ARO PD05P
Hytrel diaphragm for pump ARO 6605 XXXXX
Santoprene wheel for pump ARO PD05P, pos. 22
Set (4 pcs ) replacement O-rings, pos. 33, 93762 for pump ARO. Item "33" "O" rings are not used on models 66605H-XXX, 66605J-XXX and 66605K-XXX.
Santoprene diaphragm for pump ARO PD05P
ARO, valve seat, PP, pos. 21
Santoprene diaphragm for pump ARO PD10, pos. 7
ARO, air service kit, PD03/05/07
ARO, valve seat, PVDF, 66605X-4XX, pos. 21
Air silencer ARO, pos. 201
ARO, air sleeve, pos. 103
Air service kit for pump ARO PD03/05/07
Product detailed description
Additional parameters
Category: | ARO diaphragm pump |
---|---|
Warranty: | 1 rok vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 2 kg |
Řada : | ARO |
Materiál tělesa čerpadla: | Polypropylen |
Materiál sedel čerpadla: | Polypropylen |
Materiál kuliček čerpadla: | Santopren |
Materiál membrán čerpadla: | Santopren |
Max. výkon: | 40,1 l/min |
Max. výtlak: | 6,9 bar |
pH: | 2 až 14 |
? Samonasávací schopnost: | -2,6 m |
Max. teplota média: | |
Max. velikost pevných částic: | max. 1,6 mm |
Připojení sání/výtlak: | Vnitřní závit 3/8" BSPT |
Pohon: | Stlačený vzduch max. 6,9 bar |
Připojení vzduch: | Vnitřní závit 1/4" |
ATEX: | NE |
Service kit for diaphragm pump ARO PD03 contains 2 pcs Teflon diaphragm, 2 pcs Santoprene backing diaphragm, 4 pcs Teflon balls, o-rings
Diaphragm pump ARO with 1" BSP female thread, middle connection. Material Polypropylen/Teflon, Output 178 l/min, displacement 8,3 bar
Membrane pump ARO PD05P-BRS-PAA-B with compressed air drive. Connection internal thread 1/2" BSP. Pump material Polypropylen/Santoprene, max. output 54 l/min, discharge pressure...
Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.
Diaphragm pump, output 133 l/min, discharge 8,3 bar, material cast iron, seats cast iron, diaphragms and balls Teflon.
Diaphragm pump ARO 1/4" Polypropylene / SANTOPRENE, Output 20 l/min, discharge pressure 8,3 bar. Material Polypropylen, membrane and Santoprene beads. The pump is suitable for...
Membrane pump ARO. Material Polypropylen, membrane and Teflon beads. The pump is suitable for chemical solutions, acid alkalis, electroplating plants,... Membránové čerpadlo je...
Membrane pump ARO PD20A-BAP-GGG-B in material Hliník/Nitril, output 651 l/min, max 8.3 bar, connection internal thread 2".
FDA certified, compressed air driven food grade diaphragm pump ARO PM15A-CSS-STT-A02. Internal Tri-Clamp 2" BSP connection. Pump material Stainless steel/Teflon. Max. output...
Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.
Plastic barrel pump ARO PD05, max. output 54,5 l/min, suitable for neutral and abrasive media.
Diaphragm pump, output 200 l/min, discharge 8.3 bar, material Hliník, seats Hliník, Santoprene diaphragms.
Plastic drum pump ARO PD05, max. output 54,5 l/min, suitable for chemicals.