Plastic knee 2"1/2 internal thread, PVC 150 mm - poz.6
Code: BLKC065PSProduct detailed description
Accessories for Blower (BLOWERS)
Vacuum accessories (EXHAUSTERS)
Additional parameters
Category: | Příslušenství vývěvy Dmychadla |
---|---|
Warranty: | 6 měsíců-vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 0.2 kg |
Materiál: | PVC |
? Připojení : | 2"1/2 f vnitřní závit |
Délka: | 150 mm |
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
Plastic elbow 4" female thread, PVC 150 mm - pos.6
On-line silencer, connection external thread 3", position for both vacuum and discharge, pos. 7
On-line silencer, connection male thread 1"1/4, position for both vacuum and discharge, pos. 7
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
Filter for Blower 1"1/2, 100 µm, pos. 9
On-line silencer, connection external thread 4", position for both vacuum and discharge, pos. 7
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
PVC plastic nipple, pos. 6
Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6
On-line silencer, connection male thread 2"1/2, position for both vacuum and discharge, pos. 7
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
Plastic elbow 2" female thread, PVC 150 mm - pos.6
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...